I fell in love with
a painting.
I bought several yards of watered acetate ribbon.
I bought a straw hat blank.
I bled a bit.
And then I fell in love.
Hat, British c. 1760 via the Metropolitan Museum of Art |
Cabinet des Modes ou les Modes Nouvelles, 1 Novembre 1786, pl. III |
The Nabob's Return by Nathanial Dance c. 1769 via National Gallery of Victoria |
Tacking ribbons to a straw hat is not particular difficult. However, I wanted this bergere to be lined, so that the straw blank wouldn't catch on my hair or on the fine, delicate fabric of fine delicate caps.
Sewing the Lining:
I began by pinning a piece of silk taffeta into the crown of the hat, and then
pinning until the silk was more or less caught more or less neatly against the
straw shell of the hat. And then I
stitched.
Note: the photos of the lining being sewn are from a different hat with a covered top. This is why you're seeing an intimidating number of pins sticking through from the other side. (Yes, there was blood. Just a
splash. But it got the job done.)
To cover the underside of the brim, I traced the outline of the hat on another piece of silk taffeta, and cut myself a circle of roughly the same size. I laid the silk onto the underside of the brim, pinned it into place and stitched down the outer edge. The stitching line is hidden by a bound ribbon, so you can hand-sew or use a machine - whichever feels more comfortable. Once the outer brim is caught, pin it securely about an inch and a half away from the inner edge of the brim and cut through into the open center. Cut the excess away, leaving an inch or so of seam allowance, and then bit by bit, fold the raw edge under. Once you have MORE pins in place, stitch down your edge with whip or catch stitches (whichever bleeds less.)
Take your binding
ribbon and begin to fold it around the edge of your hat brim, holding it in
place with pins or clips. I personally
love quilting clips for this job - they
grip nicely without marking the fabric.
Begin tacking down the ribbon with small stab stitches - if you've
balanced the ribbon over the top and bottom edges, you can catch both sides of
it at once. Sew your way slowly around
the edge of the hat brim, catching the small gathers in your stitches as you
sew around the curve.
And now you can trim your hat!
Work slowly - take your time deciding where you want your ribbon placement - do
you want tight puffs? Loose puffs? Large ones? Small ones? One row? Two? Bows? Do you have a very soft silk
ribbon? A crisper taffeta one?
I trimmed this particular bergere with two rows of ribbon puffs - one stitched down at the base of the crown, and one half an inch or so further up. Let the ribbon show you how it wants to fall, and you'll find that it is doing more than half the work for you.
Play with the ribbons, stock up on bandaids, and at the end of it all, you'll
have a beautifully lined, beautifully trimmed confection!